90° Shape Silicone Elbow Coupler Hose Car Coolant Tube Universal 4 Layers Cloth-Ply Silicone Tubing Intake Boots

Features:

• Multi-Layer Woven Cloth Process - enhance the toughness of Silicone Hose, prolong the service life.
• 4 Layers Cloth-ply construction with embedded polyester reinforcement mesh.
• This design dramatically increases burst strength, prevents expansion under boost pressure, and reduce the common "ballooning" effect of hoses.

Wide application range:

• Silicone transition coupling hoses are widely used in various high-performance and industrial applications such as the automotive racing industry, turbo diesel pickup trucks, heavy-duty equipment and machinery, custom cooling systems, DIY turbo intercooler piping fabrication, commercial trucking, buses and coaches, marine vessels vehicles, aerospace systems, generators, agricultural tractors, and general construction equipment.

Material:

• Silicone Material-withstand the high temperatures of engine coolant, as well as the corrosive properties of the coolant itself.

Specification:

• Degree: 90 Degree
• Length: 102 mm / 4.02 inch
• Thicknesses: 5 mm / 0.2 inch

• Applies to Coolant, Brake Fluid, Antifreeze Fluid, Hot/Cold Wind, etc.
• Note: Reinforced Silicone Hose Are Not Compatible with fuel, oil, or any petroleum-based products.

Easy Installation:

• 1. Drain coolant and remove old hose carefully.
• 2. Clean all connection surfaces thoroughly.
• 3.Lubricate fittings lightly for easy sliding.
• 4.Position new hose, avoid twists or sharp contacts.
• 5.Secure with quality clamps; refill coolant and test.

Package included:

• 1 Set 76 mm ID 90 Degree Silicone Hose