Dual Electric Fan Relay Kit with Thermostatic Sensor Switch 185 On 175 Off 60A
Regular price
$39.60
Couldn't load pickup availability
Widely Compatibility
- Suit 10", 12", 14" and 16" fans including dual fans. We suggest using one separate relay wiring kit for each fan
- Suit on various vehicles like cars, pickups, trucks, boats, UTV, ATV etc
- Length of wire: 185cm/72.8in
- Length of Red wire: 306cm/120.5in
- Please allow a measurement error of about 0.5-1cm
- 1x Wiring Diagram
- 2x 60A relay with wiring harness
- 1x 185'F on-175'F off temperature switch
- 1x 3/8" Thread-In Probe
- 1x 3/8" to 1/2" adapter
- 2x inline fuse holder
- 4x 20 amp fuse
- 8x ring terminals
- 4x fan pigtail connectors,
- 1x spade connector for temp sensor
- 2x Relay Mount Screws.
- Connect the color-coded wires, refer wiring diagram on package.
- Red to +12VDC(10 Feet 12 Gauge )
- Blue to the electric fan relay(6 Feet 12 Gauge)
- Yellow to ignition or cooling fan switch(6 Feet 18 Gauge)
- Gray to the Thermostat Switch Sending Unit(6 Feet 18 Gauge)
- Please ensure the inlet voltage is under or equal 12V, avoid excessive voltage to blow the fuse or cables.
- The thermostat supplied with this kit is suit to mount in the cylinder head of the engine or any water jacket.
- Do not use tape on the sensor for may cause poor electrical contact or incorrect temperature readings.
- You can crimp bigger wires to it If you intend to mount high-profile cooling fans: 12 Gauge - 20Amps, 10 Gauge - 30Amps, 8 Gauge - 40 Amps
- It shall turn cooling fans on when the engine reaches the preset temperature of the thermostatic switch mounted in the engine head or when the A/C is turned on.