Engine Camshaft Crankshaft Position Sensors for Dodge Challenger 2011-2017
Regular price
$31.88
Couldn't load pickup availability
Feature:
- The crankshaft position sensor detects engine speed, piston end position and firing cylinder end signals.
- Direct replace and install, convenient to use
- It is a good replacement for the old or broken one.
- This is a non-OEM product, accessory only!
- Material: Metal, Plastic
- Pin Number: 3
- Color: Black
- OE Number:5149167AD/5149167AE/SU13886/S10404/2351560/5149141AF/PC950/PC950T/PC929/2CAM0371
- for Chrysler 200 2011-2017
- for Chrysler Town & Country 2011-2017
- for Chrysler 300 2011-2020
- for Dodge Avenger 2011-2014
- for Dodge Challenger 2011-2017
- for Dodge Charger 2011-2020
- 1. Disconnect Battery: Safely disconnect the negative battery terminal to prevent electrical shorts.
- 2. Locate & Access Sensor: Find the sensor on the engine, typically near the cylinder head or timing cover. Remove any components blocking access.
- 3. Remove Old Sensor: Unplug its electrical connector. Unscrew or unclip the old sensor from its mounting.
- 4. Install New Sensor: Place the new sensor into position. Hand-tighten screws or secure the clip. Reconnect the electrical connector firmly.
- 5. Reconnect & Test: Reconnect the battery. Start the engine to verify proper operation and check for warning lights.
- 3 Pc Crankshaft Position Sensor
- Please make sure your model's ENGINE and TRIM are as described before purchasing!