Engine Camshaft Position Sensor Kit for INFINITI EX35 2008-2012 237311KC1A

Feature:

• The camshaft position sensor detects engine speed, piston end position and firing cylinder end signals.
• Direct replace and install, convenient to use.
• It is a good replacement for the old or broken one.
• This is a non-OEM product, accessory only!

Specification:

• Material: Metal+Plastic 
• OE Number:237311KC1A/23731JA10B 

Fitment:

• for INFINITI EX35 2008-2012
• for INFINITI FX35 2009-2012
• for INFINITI Q70 2014-2015
• for INFINITI QX60 2014-2019
• for Nissan 350Z 2007-2009
• for Nissan Altima 2007-2008/2010-2013/2015-2018 

Professional installation:

• 1. Disconnect Battery: Safely disconnect the negative battery terminal to prevent electrical shorts.
• 2. Locate & Access Sensor: Find the sensor on the engine, typically near the cylinder head or timing cover. Remove any components blocking access.
• 3. Remove Old Sensor: Unplug its electrical connector. Unscrew or unclip the old sensor from its mounting.
• 4. Install New Sensor: Place the new sensor into position. Hand-tighten screws or secure the clip. Reconnect the electrical connector firmly.
• 5. Reconnect & Test: Reconnect the battery. Start the engine to verify proper operation and check for warning lights.

Package included:

• 1 Set Camshaft Position Sensor Kit 
• Crankshaft Position Sensor*1 

Note:

• Please make sure your model's ENGINE and TRIM are as described before purchasing!