Engine Camshaft Position Sensor Kit for Mercedes-Benz C43 for AMG 2017-2020
Regular price
$59.82
Couldn't load pickup availability
Feature:
- The camshaft position sensor detects engine speed, piston end position and firing cylinder end signals.
- Direct replace and install, convenient to use.
- It is a good replacement for the old or broken one.
- This is a non-OEM product, accessory only!
Specification:
- Material: Metal+Plastic
- OE Number:A2769051200/A2769050900
Fitment:
- for Mercedes-Benz C43 for AMG 2017-2020
- for Mercedes-Benz C450 for AMG 2016
- for Mercedes-Benz CLS400 2016
- for Mercedes-Benz E400 2015-2018
- for Mercedes-Benz E43 for AMG 2017-2018
- for Mercedes-Benz E450 2019-2020
- for Mercedes-Benz GL450 2015-2016
- for Mercedes-Benz GLC43 for AMG 2017-2018/2020
- for Mercedes-Benz GLE400 2016-2017/2019
- for Mercedes-Benz GLE43 for AMG 2017-2019
- for Mercedes-Benz GLE450 for AMG 2016
- for Mercedes-Benz GLE550E 2018
Professional installation:
- 1. Disconnect Battery: Safely disconnect the negative battery terminal to prevent electrical shorts.
- 2. Locate & Access Sensor: Find the sensor on the engine, typically near the cylinder head or timing cover. Remove any components blocking access.
- 3. Remove Old Sensor: Unplug its electrical connector. Unscrew or unclip the old sensor from its mounting.
- 4. Install New Sensor: Place the new sensor into position. Hand-tighten screws or secure the clip. Reconnect the electrical connector firmly.
- 5. Reconnect & Test: Reconnect the battery. Start the engine to verify proper operation and check for warning lights.
Package included:
- 1 Set Camshaft Position Sensor Kit
- Crankshaft Position Sensor*1