Engine Camshaft Position Sensor Kit for Subaru Outback 2000-2011 22056AA050

Feature:

• The camshaft position sensor detects engine speed, piston end position and firing cylinder end signals.
• Direct replace and install, convenient to use.
• It is a good replacement for the old or broken one.
• This is a non-OEM product, accessory only!

Specification:

• Material: Metal+Plastic 
• OE Number:22056AA050/22053AA040 

Fitment:

• for Subaru Outback 2000-2011
• for Subaru Forester 1999-2010
• for Subaru Impreza 1993-2010
• for Subaru Legacy 1995-2012
• for Subaru for Baja 2003-2006
• for Saab 9-2X 2005-2006 

Professional installation:

• 1. Disconnect Battery: Safely disconnect the negative battery terminal to prevent electrical shorts.
• 2. Locate & Access Sensor: Find the sensor on the engine, typically near the cylinder head or timing cover. Remove any components blocking access.
• 3. Remove Old Sensor: Unplug its electrical connector. Unscrew or unclip the old sensor from its mounting.
• 4. Install New Sensor: Place the new sensor into position. Hand-tighten screws or secure the clip. Reconnect the electrical connector firmly.
• 5. Reconnect & Test: Reconnect the battery. Start the engine to verify proper operation and check for warning lights.

Package included:

• 1 set Camshaft Position Sensor Kit 
• Crankshaft Position Sensor*1 

Note:

• Please make sure your model's ENGINE and TRIM are as described before purchasing!