Engine Camshaft Position Sensor Kit for Toyota Sequoia 4.7L 2008-2008 9091905060

Feature:

• The camshaft position sensor detects engine speed, piston end position and firing cylinder end signals.
• Direct replace and install, convenient to use.
• It is a good replacement for the old or broken one.
• This is a non-OEM product, accessory only!

Specification:

• Material: Metal + Plastic 
• OE Number:9091905060 

Fitment:

• for Toyota Sequoia 4.7L 2008-2008
• for Toyota Sequoia 4.6L 2010-2012
• for Toyota Sequoia 5.7L 2009-2014
• for Toyota Sienna 2.7L 2011-2012
• for Toyota Sienna 3.5L 2007-2014
• for Toyota Matrix 1.8L 2009-2013
• for Toyota Avalon 2.5L 2014-2014
• for Toyota Avalon 3.5L 2005-2014
• for Toyota Camry 2.5L 2010-2014
• for Toyota Camry 3.5L 2007-2014
• for Toyota Corolla 1.8L 2009-2014
• for Toyota Prius 1.8L 2010-2014 

Professional installation:

• 1. Disconnect Battery: Safely disconnect the negative battery terminal to prevent electrical shorts.
• 2. Locate & Access Sensor: Find the sensor on the engine, typically near the cylinder head or timing cover. Remove any components blocking access.
• 3. Remove Old Sensor: Unplug its electrical connector. Unscrew or unclip the old sensor from its mounting.
• 4. Install New Sensor: Place the new sensor into position. Hand-tighten screws or secure the clip. Reconnect the electrical connector firmly.
• 5. Reconnect & Test: Reconnect the battery. Start the engine to verify proper operation and check for warning lights.

Package included:

• 1 set Camshaft Position Sensor Kit 
• Harness X2