Ignition Coil Connector for Honda Accord 13-20 Harness Wiring Plug Pigtail 1 Set

OE Number:

• Does not apply 
• This is a non-OEM product, accessory only!

Fitment：

• for Honda Accord 2013-2020
• for Honda Crosstour 2013-2020
• for Honda Odyssey 2013-2020
• for Honda Passport 2013-2020
• for Honda Ridgeline 2013-2020
• for Honda Pilot 2013-2020
• for Honda for Acura 2013-2020
• for Honda MDX 2013-2020
• for Honda RDX 2013-2020
• for Honda RLX 2013-2020 

Specification:

• Material: Plastic
• Package Contents: Include 1x Ignition Coil Connector Plug, 12x Terminal

Features of Ignition Coil Connector Plug

• The ignition coil relies on a clean, tight connection to deliver high voltage to the spark plugs.
• A new connector reduces the risk of intermittent spark or ignition failure. Efficiency and low power.

Installation of replacing Ignition Coil Connector Plug

• 1. Disconnect battery to avoid shock.
• 2. Locate the ignition coil connector on the engine.
• 3. Unplug the old connector by releasing the tab.
• 4. Cut old wires near the damaged connector.
• 5. Strip wire ends (about 1/4 inch).
• 6. Crimp or solder new connector wires to existing wires.
• 7. Use heat shrink tubing or insulating tape.
• 8. Plug in new connector to the ignition coil.
• 9. Reconnect the battery and test engine.