Ignition Coil Connector for Jeep Wrangler 2007-2011 Harness Wiring Plug Pigtail

OE Number:

• Does not apply 
• This is a non-OEM product, accessory only!

Fitment：

• for Jeep Wrangler 2007-2011
• for Chrysler GrandVoyager/Voyager 2000-2002
• for Chrysler Pacifica 2005-2008
• for Chrysler Town&Country 1997-2010
• for Chrysler Voyager 2000-2008
• for Dodge Caravan 1997-2007
• for Dodge GrandCaravan 1997-2010
• for Plymouth GrandVoyager/Voyager 1997-2000
• for Volkswagen Routan 2009-2010 

Specification:

• Material: Plastic
• Package Contents: Include 1x Ignition Coil Connector Plug

Features of Ignition Coil Connector Plug

• The ignition coil relies on a clean, tight connection to deliver high voltage to the spark plugs.
• A new connector reduces the risk of intermittent spark or ignition failure. Efficiency and low power.

Installation of replacing Ignition Coil Connector Plug

• 1. Disconnect battery to avoid shock.
• 2. Locate the ignition coil connector on the engine.
• 3. Unplug the old connector by releasing the tab.
• 4. Cut old wires near the damaged connector.
• 5. Strip wire ends (about 1/4 inch).
• 6. Crimp or solder new connector wires to existing wires.
• 7. Use heat shrink tubing or insulating tape.
• 8. Plug in new connector to the ignition coil.
• 9. Reconnect the battery and test engine.