TPMS Sensor 433 MHz for Mazda 2 2007-2014 for Mazda 3 2008-2013 BDMC37140

OE Number:

• BDMC37140

Fitment:

• for Mazda 2 2007-2014
• for Mazda 3 2008-2013
• for Mazda CX-3 2015-2019
• for Mazda CX-5 2012-2017
• for Mazda 6 2007-2020
• for Mazda Atenza 2020-2023

Specification:

• Material: Plastic
• Frequency: 433 MHz
• This is a non-OEM product, accessory only!
• Include: 1 Pcs Tire Pressure Sensor

Features:

• No Sensor Programming Required: The tire pressure monitor system (TPMS) comes pre-programmed specifically for your vehicle make/model/year, you just need to activate it with a scan tool (use OBD learning).
• Tire pressure sensor main function is to monitor car tire internal pressure and allow you to know the tire condition.
• Good accuracy and sensitivity, enhance the safety of your vehicle. A good aftermarket replacement directly replaces your old or broken one.

Installation:

• 1. Deflate the tire and break the bead.
• 2. Remove the tire from the rim.
• 3. Unscrew and remove the old TPMS sensor.
• 4. Install the new TPMS sensor and tighten securely.
• 5. Re-mount the tire and inflate to the proper pressure.
• 6. Rebalance the wheel if needed.
• 7. Relearn or program the new sensor using a TPMS tool or via vehicle settings.
• 8. Test to ensure the sensor is working correctly.

Note:

• After installation, please park the car and turn off the engine for about 20 minutes, and keep the remote control key 5 meters away from car.
• Then start the vehicle and keep it running at a rate of 25 km/h above for 5-10 minutes to match the TPMS sensor.
• If the outdoor temperature is below 0 degrees, the matching time may be longer; that is normal.